CAB-602

CAB-602 COM-HPC

  • COM-HPC carrier board
  • Supports COM HPC Size A Module (95x120mm), B Module (120x120mm) and C Module (120 x 160mm)
  • Supports 3 Digital Display Interfaces (DDI) with HDMI output, 1 eDP
  • 1 x PCIe x16 (Gen5), 1 x PCIe x4 (Gen5), 4 x USB4/TBT, 2 x USB 3.2 Gen2, 2 x USB 2.0, 1 x M.2 Key E, 1 x M.2 Key B, 6 x M.2 Key M, 4 x COM, 2 x SATA3
  • 1 x Intel® 1 Gigabit LAN, 1 x slot with 2.5 Gigabit LAN, 1 x Realtek 2.5 Gigabit LAN, 1 x slot with 10 Gigabit LAN
  • ATX PWR (24+8-pin) and 8~24V DC-in (8-pin) co-design
Datasheet
Specification

Processor System

CPU By Module
Chipset By Module
Socket By Module

Form Factor

Dimensions ATX (12-in x 9.6-in x 1.4-in, 30.5 cm x 24.4 cm x 3.71 cm)

Expansion Slot

PCIe 1 x PCIe x16 (Gen5)
1 x PCIe x4 (Gen5)
M.2 1 x M.2 (Key E, 2230) with PCIe Gen4 x1, USB 2.0 and CNVi for Wireless
1 x M.2 (Key B, 3042/3052) with PCIe Gen4 x1, USB 2.0

Audio

Interface Realtek ALC897, High Definition Audio. Line-in, Line-out, Mic-in

Ethernet

Controller/ Speed LAN1: 1 x slot with 10/100/1000/2500 Mbps
LAN2: Realtek RTL8125BG with 10/100/1000/2500 Mbps
LAN3: Intel® I210AT with 10/100/1000 Mbps
LAN4: 1 x slot with 10/100/1000/2500/10000 Mbps
Connector 4 x RJ-45

Rear I/O

HDMI 3 x HDMI 2.0b
Ethernet 1 x 1 Gigabit LAN
2 x 2.5 Gigabit LAN
1 x 10 Gigabit LAN
USB 1 x USB4/TBT (Type-C, 5V/3A)
2 x USB 3.2 Gen2 (BOM option with 2 internal USB4)
Audio 3 (Mic-in, Line-out, Line-in)

Internal Connector

USB 3 x USB4/TBT
2 x USB 2.0 (1 x 2.54 pitch header)
COM COM1, COM2 (RS-232/422/485)
COM3, COM4 (RS-232)
Parallel 1
GPIO 6 x GPI, 6 x GPO
eDP 1
SATA PWR Output 1
Speaker Header 1
MIPI Camera Header 2 (MIPI CSI2)

Security

TPM TPM 2.0 onboard IC

Storage

M.2 4 x M.2 (Key M, 2242/2280) with PCIe Gen3 x4
2 x M.2 (Key M, 2242/2280) with PCIe Gen5 x4
SATA 2 x SATA3 (6Gb/s)

Watchdog Timer

Output From Super I/O to drag RESETCON#
Interval 256 Segments, 0, 1, 2, ...255sec

Power Requirements

Input PWR ATX PWR (24+8-pin) and 8~24V DC-in (8-pin) co-design
Power On AT/ATX Supported
- AT : Directly PWR on as power input ready
- ATX : Press button to PWR on after power input ready

Environment

Operating Temp -20°C ~ 70°C
Storage Temp -40° C – 85° C
Operating Humidity 5% ~ 90% (non-condensing)
Storage Humidity 5% ~ 90% (non-condensing)

The specification is subject to change without notice in advance. The brand and product names are trademarks of their respective companies. Any configuration other than original product specification is not guaranteed.

Related Products

CAB-1001

COM Express Motherboard

COM Express Type 10 Pin Out

CAB-602 New

COM-HPC

COM-HPC carrier board