CAB-202 Pico-ITX Motherboard
- Supports Pico-ITX module
- 1 x DisplayPort
- 1 x USB 3.2 Gen2, 2 x USB 2.0
- 1 x M.2 Key E, 1 x M.2 Key M
- 1 x MIOe
- 12V DC-in
製品仕様
Form Factor
| Dimensions | mini-ITX (6.7-in x 6.7-in x 1.46-in, 17.0 cm x 17.0 cm x 3.71 cm) |
|---|
Graphics
| DisplayPort | Display Port 1.4a, DP++ Max resolution up to 4096x2160@60Hz |
|---|
Expansion Slot
| M.2 | 1 x M.2 (Key E, 2230) with PCIe x1 |
|---|---|
| MIO | 1 (DP++, 1 x USB 3.2 Gen2, 1 x USB 2.0, 3 x PCIe x1, eSPI bus, SBMus) |
Audio
| Interface | Realtek ALC122 HD, High Definition Audio |
|---|
Ethernet
| Controller/ Speed | 1 x slot 10/100/1000 Mbps |
|---|---|
| Connector | 1 x RJ-45 |
Rear I/O
| DisplayPort | 1 x DP 1.4a |
|---|---|
| Ethernet | 1 x 1 Gigabit LAN |
| USB | 1 x USB 3.2 Gen2 |
| Audio | 3 (Line-in, Line-out, Mic-in) |
| DC Jack | 1 x DC in |
Internal Connector
| USB | 2 x USB 2.0 (1x2.54 pitch header) |
|---|---|
| GPIO | 4 x GPI, 4 x GPO |
| Speaker Header | 1 x 3W Speaker Header |
Storage
| M.2 | 1 x M.2 (Key M, 2242/2280) with PCIe x1 |
|---|
Power Requirements
| Input PWR | 12V DC-in |
|---|---|
| Power On | AT/ATX Supported - AT : Directly PWR on as power input ready - ATX : Press button to PWR on after power input ready |
Environment
| Operating Temp | 0ºC ~ 70ºC |
|---|---|
| Storage Temp | -40° C – 85° C |
| Operating Humidity | 5% ~ 90% |
| Storage Humidity | 5% ~ 90% |
上記製品は事前通知がないまま仕様変更する可能性はあります。製品のブランドと製品名は商標としてアスロックインダストリアルが所有、ユザー側より製品の既存仕様に対して変更を行われた場合弊社側一切保証を付けません。