常見技術問題
| FAQ編號 | 25102101 |
|---|---|
| 問題 | I would like to adjust AMT Configuration of MEBx option under BIOS but it shows “Configuration locked after EndOfPost”, how do I fix it? |
| 發布日期 | 2025-10-28 |
| 產品 |
All model |
| FAQ類別 | |
| 解答 | For security and AMT setup requirements, a boot device must be installed for the system to allow AMT provisioning. If you would like to adjust AMT Configuration properly, please connect a boot device before powering on system then press DEL/F2 to enter BIOS environment for further setting. Otherwise, the AMT option will remain restricted from modification.
Without connect boot device then auto boot into BIOS:
Connect boot device then press DEL/F2 to boot into BIOS then AMT Configuration settings would be available:
|
